Hot Water in Macquarie Plains, TAS

Hot Water Systems in Macquarie Plains

The 7140 postcode, covering Macquarie Plains, Black Hills, Boyer, Bradys Lake, Bronte Park, Bushy Park, Butlers Gorge, Dee, Derwent Bridge, Ellendale, Fentonbury, Fitzgerald, Florentine, Glenfern, Glenora, Gretna, Hamilton, Hayes, Hollow Tree, Karanja, Lachlan, Lake St Clair, Lawitta, Little Pine Lagoon, London Lakes, Magra, Malbina, Maydena, Meadowbank, Molesworth, Moogara, Mount Field, Mount Lloyd, National Park, New Norfolk, Osterley, Ouse, Plenty, Rosegarland, Sorell Creek, Strickland, Styx, Tarraleah, Tyenna, Uxbridge, Victoria Valley, Wayatinah and Westerway and surrounding areas, is home to around 5,365 households. With many households already generating their own clean solar power, many are now looking at how they can make their entire home energy system more efficient, with hot water heating often the logical next step.

With hot water roughly accounting for a quarter of the average home's energy use, switching to an energy-efficient hot water system is one of the biggest opportunities for savings. Across Macquarie Plains and the 7140 area, 123 homeowners have already switched from older electric storage and gas hot water systems to solar hot water or air-source heat pump systems that draw on clean, renewable power while also claiming the hot water rebates to reduce their hot water heater system cost. These highly-efficient systems not only help cut energy bills but also reduce carbon emissions and improve overall energy independence.

With Macquarie Plains's climate delivering an average of 3.9 kWh/m² per day, conditions are ideal for hot water systems and hybrid heat pump systems that harness both sunlight and ambient air temperature to heat water efficiently all year round. When paired with existing rooftop solar power or solar batteries, the result is hot water that costs far less to run and is powered by clean, self-generated energy.

Icon

Hot Water Ranking

Postcode 7140

22nd

State Wide

1309th

Australia Wide

Hot Water Installation Macquarie Plains

Estimated daily energy to heat household water, comparing a resistive electric element with a high-efficiency heat pump. Demand shifts month-to-month using local climate patterns.

Energy Efficient Hot Water & Solar Power Macquarie Plains

* Data from the Bureau of Meteorology. Closest station: N/A.

Solar Powered Hot WaterMacquarie Plains

Illustrates how a typical 6.6 kW rooftop solar system can offset the daytime energy demand of a COP 5 heat pump hot water unit.

Financial Ad Icon

Want Solar Finance Options?

Compare lenders and get tailored loan offers.

Heat Pump Hot Water Systems for Macquarie Plains

Compare heat pump hot water systems suitable for Macquarie Plains's climate. These energy-efficient systems are designed to work in local temperature conditions and can significantly reduce your hot water energy costs.

Community Hot Water Statistics - Macquarie Plains, 7140

Icon

Hot Water Demographics - Macquarie Plains

Based on the Australian Bureau of Statistics 2021 Census (ABS), Macquarie Plains has around 5,365 private dwellings, home to approximately 11,086 people. With an average household size of 2.4 people, and around 50 litres of hot water used per person each day in Australia, Macquarie Plains households use approximately 120 litres of hot water daily, equating to a massive 0.6 million litres of hot water used across the suburb every single day.

Other census insights reinforce Macquarie Plains's suitability for energy-saving improvements like energy-efficient or solar-powered hot water. The Macquarie Plains community is home to 776 couple families with children and 352 one-parent families, meaning a large proportion of households face substantial hot water demand. With 1,743 homes owned with a mortgage and 1,676 owned outright, many residents also have the homeownership and growing equity that make switching to efficient hot water systems a practical way to lower expenses.

Macquarie Plains is converting hot water demand to efficient systems faster than many peers, with 2.3% of dwellings already upgraded.

Icon

Hot water systems in Macquarie Plains

Around Macquarie Plains and the wider 7140 area, more households are starting to look twice at their old hot water system and ask whether it is worth the running costs. With most homes here being separate houses and an average household size of about 2.4 people, hot water demand is steady year‑round. Power prices keep creeping up, while median household incomes sit around $1,197 a week, so it makes sense that families and retirees alike are hunting for a more energy efficient hot water system that does not blow the budget.

The local climate actually helps. Macquarie Plains enjoys an average annual solar exposure of about 13.9 MJ/m² a day – roughly 3.9 kWh/m² – which is strong enough to support both a modern solar hot water system and a quality heat pump hot water system. Even on cooler Tasmanian days, a well‑designed solar hot water heating system or heat pump can make the most of that sunlight and ambient air, slashing electricity use compared with an older electric hot water system or gas unit. For many homes, upgrading from gas or a tired electric cylinder is the logical next step in cutting bills and emissions, especially when you look at the annual hot water energy savings on offer.

Across the 4,582 occupied private dwellings in the postcode, a big share are owned outright or with a mortgage, which means owners can plan longer‑term upgrades like efficient hot water. Hot water energy use can be one of the largest single loads in the home, so choosing the most efficient hot water system has a real impact on overall bills. In Macquarie Plains, that often means weighing up heat pump vs solar hot water, or considering solar hot water vs electric hot water when you already have rooftop solar.

Typical annual bill savings for local upgrade scenarios can look like:

  • Replacing an old electric hot water system with a heat pump hot water system: save around $350–$700 per year.
  • Switching from gas to a heat pump hot water system: save roughly $250–$600 per year.
  • Switching from gas to a solar hot water system: save around $300–$650 per year.
  • Replacing an old electric unit with a modern electric hot water installation powered by rooftop solar: save about $250–$500 per year.

Brands like Rheem and Rinnai are common choices for both solar and efficient electric hot water, with options such as Rheem solar hot water and Rinnai solar hot water for those wanting roof‑mounted collectors and a solar hot water tank replacement. For premium performance, many homeowners look at a Sanden heat pump or other contenders for the best heat pump hot water system in Australia. Rheem heat pump hot water models are also popular where reliability and easy hot water repair support are priorities. Together, these brands give Macquarie Plains households a solid spread of options across solar hot water installation, heat pump hot water installation and electric hot water installation.

In the 7140 postcode, there have already been 123 efficient hot water systems installed, combining heat pump and solar hot water installations. Install activity picked up sharply from 2008, with busy years in 2008, 2009 and 2011 in particular, before settling into a steady trickle of upgrades through the late 2010s and early 2020s. This pattern shows a clear local interest in electrification and lower running costs, as more residents move away from older gas and resistive electric units towards energy efficient hot water systems that better suit Tasmanian conditions.

Even if your own home has not been upgraded yet, there is growing interest in hot water TAS wide in replacing old gas or electric hot water with efficient options like heat pumps, modern electric hot water systems or a solar hot water system. Federal incentives, such as Small‑scale Technology Certificates (STCs), and state‑based schemes can act like an upfront solar hot water rebate or heat pump hot water rebate, cutting the effective solar hot water price / cost or heat pump hot water price / cost by a substantial percentage. For some households, electric hot water system rebate support can also apply when moving away from gas.

For a typical Macquarie Plains family, combining rebates with rooftop solar can reduce the payback period on a new solar hot water heating system or heat pump to just a few years, especially if you use timers or solar‑diversion controls so more of your hot water is heated during sunny periods. Over the life of the system, that can add up to thousands of dollars in savings, particularly when you factor in avoided hot water repair costs on older units and the long‑term stability of having your own reliable hot water TAS home set‑up.

When you are comparing options, it is worth looking beyond just the hot water system price / cost and considering running costs, local support and how well the unit will work with your existing solar. For many Macquarie Plains homes, an energy efficient hot water system like a heat pump or solar hot water system will be the best hot water system Australia can offer for long‑term value. Others may decide that a well‑sized, modern electric hot water system is a good stepping stone away from gas hot water, especially if solar panels are already on the roof.

If you live in Macquarie Plains and your current unit is ageing, noisy or running up big bills, now is a good time to see whether a heat pump, solar hot water system or efficient electric hot water upgrade could suit your place. Talk with experienced local hot water installers who know heat pump and solar hot water repair and installation inside out. With Macquarie Plains’ solid solar exposure and growing interest in sustainability, a smart hot water upgrade can trim bills, cut emissions and future‑proof your home. For tailored advice on hot water systems Macquarie Plains residents can rely on, connect with trusted local experts and get personalised guidance with us.

Nearby Suburbs

See Also