Hot Water Systems in Ferguson
The 6236 postcode, covering Ferguson, Crooked Brook, Dardanup, Dardanup West, Henty, Paradise, Wellington Forest and Wellington Mill and surrounding areas, is home to around 899 households. With many households already generating their own clean solar power, many are now looking at how they can make their entire home energy system more efficient, with hot water heating often the logical next step.
With hot water roughly accounting for a quarter of the average home's energy use, switching to an energy-efficient hot water system is one of the biggest opportunities for savings. Across Ferguson and the 6236 area, 436 homeowners have already switched from older electric storage and gas hot water systems to solar hot water or air-source heat pump systems that draw on clean, renewable power while also claiming the hot water rebates to reduce their hot water heater system cost. These highly-efficient systems not only help cut energy bills but also reduce carbon emissions and improve overall energy independence.
With Ferguson's climate delivering an average of 5.0 kWh/m² per day, conditions are ideal for hot water systems and hybrid heat pump systems that harness both sunlight and ambient air temperature to heat water efficiently all year round. When paired with existing rooftop solar power or solar batteries, the result is hot water that costs far less to run and is powered by clean, self-generated energy.
Hot Water Ranking
Postcode 6236
121st
State Wide
644th
Australia Wide
Hot Water Installation Ferguson
Estimated daily energy to heat household water, comparing a resistive electric element with a high-efficiency heat pump. Demand shifts month-to-month using local climate patterns.
Energy Efficient Hot Water & Solar Power Ferguson
* Data from the Bureau of Meteorology. Closest station: N/A.
Solar Powered Hot WaterFerguson
Illustrates how a typical 6.6 kW rooftop solar system can offset the daytime energy demand of a COP 5 heat pump hot water unit.
Want Solar Finance Options?
Compare lenders and get tailored loan offers.
Heat Pump Hot Water Systems for Ferguson
Compare heat pump hot water systems suitable for Ferguson's climate. These energy-efficient systems are designed to work in local temperature conditions and can significantly reduce your hot water energy costs.
Community Hot Water Statistics - Ferguson, 6236
Hot Water Demographics - Ferguson
Based on the Australian Bureau of Statistics 2021 Census (ABS), Ferguson has around 899 private dwellings, home to approximately 1,983 people. With an average household size of 2.6 people, and around 50 litres of hot water used per person each day in Australia, Ferguson households use approximately 130 litres of hot water daily, equating to a massive 0.1 million litres of hot water used across the suburb every single day.
Other census insights reinforce Ferguson's suitability for energy-saving improvements like energy-efficient or solar-powered hot water. The Ferguson community is home to 165 couple families with children and 28 one-parent families, meaning a large proportion of households face substantial hot water demand. With 339 homes owned with a mortgage and 328 owned outright, many residents also have the homeownership and growing equity that make switching to efficient hot water systems a practical way to lower expenses.
Ferguson is converting hot water demand to efficient systems faster than many peers, with 48.5% of dwellings already upgraded.
Hot water systems in Ferguson
Across Ferguson and the wider 6236 area, more households are shifting from old gas and ageing electric units to an energy efficient hot water system that actually suits modern living. With most homes here being separate houses and an average household size of around 2.6 people, hot water demand is steady year‑round, especially for busy families and older couples wanting reliable comfort without bill shock.
Ferguson’s sunshine is a real asset. The local weather station records mean daily solar exposure of about 18 MJ/m², which is roughly 5 kWh/m² per day. That strong solar resource means a solar hot water system or heat pump hot water system can perform very well, slashing the energy needed to heat your water. For owner‑occupiers (over 660 households own their home outright or with a mortgage), upgrading from gas or an old electric hot water system to a modern, efficient hot water technology is a logical next step to lock in long‑term savings. Annual hot water energy savings for a typical Ferguson home can easily reach hundreds of dollars when you pair the right system with smart tariffs and, if you have it, rooftop solar.
In a postcode with 785 occupied dwellings and a relatively high median household income, many locals are looking for the best hot water system Australia can offer in terms of running costs and comfort. That might be a solar hot water heating system, a high‑performance heat pump hot water system, or a modern electric hot water system set up to run on daytime solar. Brands like Rheem heat pump hot water units and Rheem solar hot water systems, Rinnai solar hot water, Sanden heat pump models and Chromagen solar hot water systems are all popular options for people wanting the most efficient hot water system they can reasonably afford.
Around Ferguson 6236, efficient hot water upgrades are already well under way. A total of 436 efficient hot water systems – mainly heat pump and solar hot water installation projects – have gone in across the postcode. Install numbers lifted sharply from the mid‑2000s, with strong years like 2005 and 2008, and have stayed steady right through to 2024, showing ongoing interest in electrification and lower running costs. Each new hot water installation helps shift local homes away from gas and older resistive units towards a cleaner, energy efficient hot water system.
For a typical Ferguson household, hot water is one of the biggest single energy loads, so choosing carefully really matters. Homeowners here are weighing up heat pump vs solar hot water, or solar hot water vs electric hot water, and even electric hot water vs gas hot water as gas prices and supply concerns continue. A well‑sized heat pump hot water installation can use a fraction of the energy of an old electric system, while a quality solar hot water installation with a roof‑mounted solar hot water tank replacement can use the sun for most of the year and only top up with electricity when needed. Where gas is being phased out or avoided, an electric hot water installation paired with rooftop PV can still be an energy efficient hot water solution.
Typical hot water system price and running costs depend on your choice of technology, brand and size. While a heat pump hot water price may be higher upfront than a basic electric unit, the bill savings can be substantial over time. Likewise, a solar hot water price can look steep until you factor in rebates and the free energy from the sun. To give you a feel for potential savings in Ferguson:
• Old electric to heat pump hot water system: save roughly $350–$650 per year on bills • Gas to heat pump hot water system: save around $250–$500 per year • Gas to solar hot water system: save about $300–$600 per year • Old electric to modern electric hot water system with solar: save around $200–$450 per year
Local installers work with a range of brands to match systems to Ferguson homes. Sanden heat pump units are popular for their quiet operation and excellent efficiency, making them a strong contender for best heat pump hot water system in cooler months. Rheem solar hot water and Chromagen solar hot water systems are common choices where roof space and orientation suit a solar hot water heating system. Rinnai solar hot water options round out the field for those wanting proven reliability with solid local support.
Hot Water Rebates, Tariffs & Savings
Interest in efficient hot water in Ferguson WA is growing as more people look to cut bills and move away from gas. Federal incentives like Small‑scale Technology Certificates (STCs) apply to eligible solar hot water systems and heat pump hot water systems, effectively operating as an upfront discount. On top of that, WA homeowners may be able to access state or retailer programs that act like a hot water rebate WA, including a heat pump hot water rebate or solar hot water rebate on approved models. In some cases, an electric hot water system rebate can also apply when replacing an old, inefficient unit with a more efficient option.
These hot water rebate WA schemes can reduce the effective hot water system price or solar hot water price by a significant percentage, especially when combined with competitive installer pricing. For many Ferguson households, that means the payback period on a heat pump hot water system or solar hot water system can shrink to just a few years, particularly if you run the unit on a solar‑friendly tariff or use timers and solar‑diversion controls. With typical savings of hundreds of dollars per year, the overall heat pump hot water cost over its lifetime can be much lower than sticking with gas.
If your current unit is ageing, noisy or you are facing a hot water repair that is nearly as expensive as a new system, it is worth comparing options now. Local specialists can assess whether a solar hot water repair will keep your system going, or whether a full solar hot water tank replacement or fresh hot water installation makes more sense.
When you are ready to look at hot water WA options, it pays to talk with experienced local hot water installers who understand Ferguson’s climate, block sizes and family needs. Whether you are switching from gas to a heat pump, weighing up heat pump vs solar hot water, or planning a full solar hot water installation, the right advice can help you reduce bills, cut emissions and future‑proof your home. To explore energy efficient hot water systems Ferguson households are choosing – from Rheem heat pump hot water to Sanden and beyond – connect with trusted local experts for personalised guidance and a clear quote on the best solution for your place.