Hot Water Systems in Nanson
The 6532 postcode, covering Nanson, Ajana, Binnu, Bootenal, Bringo, Buller, Burma Road, Cape Burney, Carrarang, Coburn, Coolcalalaya, Dartmoor, Deepdale, Dindiloa, Drummond Cove, Durawah, East Chapman, East Nabawa, East Yuna, Ellendale, Eradu, Eradu South, Eurardy, Georgina, Glenfield, Greenough, Hamelin Pool, Hickety, Howatharra, Kojarena, Marrah, Meadow, Minnenooka, Moonyoonooka, Mount Erin, Nabawa, Naraling, Narngulu, Narra Tarra, Nerren Nerren, Nolba, North Eradu, Northern Gully, Oakajee, Rockwell, Rudds Gully, Sandsprings, South Yuna, Tamala, Tibradden, Toolonga, Valentine, Wandana, West Binnu, White Peak, Wicherina, Wicherina South, Yetna and Yuna and surrounding areas, is home to around 2,628 households. With many households already generating their own clean solar power, many are now looking at how they can make their entire home energy system more efficient, with hot water heating often the logical next step.
With hot water roughly accounting for a quarter of the average home's energy use, switching to an energy-efficient hot water system is one of the biggest opportunities for savings. Across Nanson and the 6532 area, 894 homeowners have already switched from older electric storage and gas hot water systems to solar hot water or air-source heat pump systems that draw on clean, renewable power while also claiming the hot water rebates to reduce their hot water heater system cost. These highly-efficient systems not only help cut energy bills but also reduce carbon emissions and improve overall energy independence.
With Nanson's climate delivering an average of 5.7 kWh/m² per day, conditions are ideal for hot water systems and hybrid heat pump systems that harness both sunlight and ambient air temperature to heat water efficiently all year round. When paired with existing rooftop solar power or solar batteries, the result is hot water that costs far less to run and is powered by clean, self-generated energy.
Hot Water Ranking
Postcode 6532
64th
State Wide
331st
Australia Wide
Hot Water Installation Nanson
Estimated daily energy to heat household water, comparing a resistive electric element with a high-efficiency heat pump. Demand shifts month-to-month using local climate patterns.
Energy Efficient Hot Water & Solar Power Nanson
* Data from the Bureau of Meteorology. Closest station: N/A.
Solar Powered Hot WaterNanson
Illustrates how a typical 6.6 kW rooftop solar system can offset the daytime energy demand of a COP 5 heat pump hot water unit.
Want Solar Finance Options?
Compare lenders and get tailored loan offers.
Heat Pump Hot Water Systems for Nanson
Compare heat pump hot water systems suitable for Nanson's climate. These energy-efficient systems are designed to work in local temperature conditions and can significantly reduce your hot water energy costs.
Community Hot Water Statistics - Nanson, 6532
Hot Water Demographics - Nanson
Based on the Australian Bureau of Statistics 2021 Census (ABS), Nanson has around 2,628 private dwellings, home to approximately 6,044 people. With an average household size of 2.7 people, and around 50 litres of hot water used per person each day in Australia, Nanson households use approximately 135 litres of hot water daily, equating to a massive 0.4 million litres of hot water used across the suburb every single day.
Other census insights reinforce Nanson's suitability for energy-saving improvements like energy-efficient or solar-powered hot water. The Nanson community is home to 617 couple families with children and 129 one-parent families, meaning a large proportion of households face substantial hot water demand. With 1,019 homes owned with a mortgage and 783 owned outright, many residents also have the homeownership and growing equity that make switching to efficient hot water systems a practical way to lower expenses.
Nanson is converting hot water demand to efficient systems faster than many peers, with 34.0% of dwellings already upgraded.
Hot water systems in Nanson
Across Nanson and the wider 6532 district, more households are moving away from old gas and power‑hungry electric units and towards an energy efficient hot water system. With an average household size of around 2.7 people and more than 2,300 occupied dwellings, reliable, affordable hot water is a big deal for local families and farms. Power prices keep climbing, so upgrading to a modern heat pump hot water system, solar hot water system or efficient electric hot water system is a logical next step for many homeowners. The local solar exposure is excellent – around 20.5 MJ/m² per day on average, or roughly 5.7 kWh/m² of sunshine – which makes both heat pump and solar hot water heating system options perform very well in Nanson’s climate.
With a strong base of owner‑occupied homes (over 1,800 owned outright or with a mortgage) and a solid median household income, many locals are choosing to invest in long‑term savings rather than keep patching up an old unit. A well‑chosen hot water installation can slash the energy used for hot water, which is often one of the biggest loads in an all‑electric home. For families, retirees and growing households alike, shifting from electric hot water vs gas hot water to something more efficient can mean real money back in the budget each year.
Around Nanson 6532 there are clear signs of this shift. There have already been 894 efficient hot water systems installed – mainly heat pump and solar – and that number keeps ticking up. Installations really picked up from 2007 onwards, peaking around 2010–2014 when more than 80 systems a year were going in at times, and there has been steady interest right through to 2025. This trend shows how locals are taking electrification seriously, replacing ageing gas storage units with a heat pump hot water system or solar hot water vs electric hot water, and choosing the most efficient hot water system they can within budget.
Typical annual bill savings for Nanson households can look like this:
• Replacing an old electric hot water system with a quality heat pump hot water installation: about $350–$700 per year. • Swapping gas to a heat pump hot water system: around $300–$600 per year. • Going from gas to a roof‑mounted solar hot water installation: roughly $250–$600 per year. • Upgrading an old electric unit to a modern electric hot water installation paired with rooftop solar: about $250–$500 per year.
Brands like Rheem heat pump hot water and Rheem solar hot water are popular for their reliability and broad range, while Rinnai solar hot water and Chromagen solar hot water systems are often chosen for robust solar hot water tank replacement on rural properties. For those chasing the best heat pump hot water system, premium units such as the Sanden heat pump are known for very low running costs, which helps bring the overall heat pump hot water price / cost down over the life of the system. Choosing the best hot water system Australia can offer for your situation means weighing up heat pump vs solar hot water, your roof space, water use and whether you already have solar power.
In WA, hot water rebate wa programs are helping to drive this uptake. Federal incentives such as Small‑scale Technology Certificates (STCs) reduce the solar hot water price / cost or heat pump hot water price / cost at the point of sale, and state schemes can add a heat pump hot water rebate or solar hot water rebate on top. There are also options for an electric hot water system rebate when you replace old, inefficient units with an energy efficient hot water system. For many Nanson homeowners, these discounts effectively cut the system cost by a sizeable chunk and can bring payback periods down to just a few years, especially if you run the system on timers or use solar diversion to soak up excess rooftop solar.
Whether you need hot water repair on a tired tank, a full solar hot water tank replacement, or you are planning a fresh hot water installation for a new build, it pays to get local advice. If you are weighing up solar hot water vs electric hot water or looking at hot water WA tariff options, experienced installers can help you compare hot water system price / cost, rebates and running costs so you can choose confidently.
If you are in Nanson and your current unit is old, noisy or costing a fortune to run, now is a smart time to explore a hot water upgrade. Talk with our trusted local hot water WA specialists about heat pumps, solar hot water heating system options and efficient electric units. With strong sunshine, a community already embracing sustainability and generous hot water rebate WA incentives, an efficient system can cut your bills, lower emissions and future‑proof your home. Connect with our experienced hot water installers for personalised advice and find the right solution for your place in Nanson.
